How To Change A Kitchen Mixer Tap. If there is a cap, pry it off gently with the tip of a stanley knife or screwdriver. While the tap is turned on, check for leaks on all sides.
Always use a plumber to install your mixer tap. This video will show you how to change your kitchen mixer tap. By law, if you don’t have a plumbing license, you can not install or adjust your cold or hot water pipes.
This is how to replace a mixer tap step by step. Turn off the supply of water. A handy tip is to place a towel on the sink top around the tap and an old rag.
I will show you just how easy it is to remove the old kitchen tap and install a new one. Now run the kitchen tap empty to make sure you completely drain the pipes of any water. Make sure it’s tight and sealed, to prevent any leaks.
You’ll need to cut off the water supply to your tap to work on it. Most kitchen taps these days are modern mixer tap designs. Replace the mixer tap cartridge.
To begin changing the washer on a bathroom mixer tap, cut off the water flow. If there is a retaining screw, you’ll need a phillips head screwdriver to remove it. Depending on your installation, this will have a switch on/off valve.
By law, if you don’t have a plumbing license, you can not install or adjust your cold or hot water pipes. In this video it is a monoblock tap. In turning off the supply of water to change the kitchen tap, you have to situate the isolating valves of the supply system of the pipe.
Comments
Post a Comment